TP-Link TL-R470T+ manual 2 LAN, 2.1 LAN,  BigPond Status

 BigPond Status
Status:	Displays the status of BigPond connection.
	 “Disabled” indicates that the BigPond connection type is not
	applied.
	 “Connecting” indicates that the router is obtaining the IP
	parameters from your ISP.
	 “Connected” indicates that the router has successfully obtained
	the IP parameters from your ISP.
	 “Disconnected” indicates that the connection has been
	manually terminated or the router gets no response from your
	ISP. Please ensure that your settings are correct and your
	network is connected well. Consult your ISP if this problem
	remains.
IP Address:	Displays the IP address assigned by your ISP.
Subnet Mask:	Displays the Subnet Mask assigned by your ISP.
Default Gateway:	Displays the IP address of the default gateway assigned by your
	ISP.

Note:

To ensure the BigPond connection re-established normally, please restart the connection at least 5 seconds after the connection is off.

4.3.2 LAN

4.3.2.1LAN

On this page, you can configure the parameters for LAN port of this router.

Choose the menu Network→LAN→LAN to load the following page.

Figure 4-9 LAN

-35-