TP-Link TL-R470T+ manual IP Address,  Pptp Status

IP Address:	If Static IP is selected, configure the IP address of WAN port.
	If Dynamic IP is selected, the IP address of WAN port
	obtained is displayed.
Subnet Mask:	If Static IP is selected, configure the subnet mask of WAN
	port. If Dynamic IP is select, the subnet mask of WAN port
	obtained is displayed.
Default Gateway:	If Static IP is selected, configure the default gateway. If
	Dynamic IP is selected, the obtained default gateway is
	displayed.
Primary DNS/Secondary DNS: If Static IP is selected, configure the DNS. If Dynamic IP is
	selected, the obtained DNS is displayed.
Upstream Bandwidth:	Specify the bandwidth for transmitting packets on the port.
Downstream Bandwidth:	Specify the bandwidth for receiving packets on the port.
 PPTP Status
Status:	Displays the status of PPTP connection.
	 “Disabled” indicates that the PPTP connection type is
	not applied.
	 “Connecting” indicates that the router is obtaining the
	IP parameters from your ISP.
	 “Connected” indicates that the router has successfully
	obtained the IP parameters from your ISP.
	 “Disconnected” indicates that the connection has been
	manually terminated or the router gets no response
	from your ISP. Please ensure that your settings are
	correct and your network is connected well. Consult
	your ISP if this problem remains.
IP Address:	Displays the IP address assigned by your ISP.
Primary DNS:	Displays the IP address of your ISP’s Primary DNS.
	-32-