Tracert

Destination IP/Domain: Enter destination IP address or Domain name here. Then select a

port for testing, if Auto is selected, the router will select the interface of destination automatically. After clicking the <Start> button, the router will send Tracert packets to test the connectivity of the gateways during the journey from the source to destination of the test data and the results will be displayed in the box below.

4.8.5.2Online Detection

On this page, you can detect the WAN port is online or not.

Choose the menu Maintenance→Diagnostics→Online Detection to load the following page.

Figure 4-68 Online Detection

The following items are displayed on this screen:

General

Port:

Select the port to be detected.

Detecting:

Activate or inactivate Online Detection function. When Online Detection is

 

active, WAN status will depend on the result of both PING and DNS

 

Lookup. When Online Detection is inactive, WAN status will be detected

 

according to physical connection status and dial-up status.

Mode:

Detect automatically or Manually. In Auto mode, gateway will be selected

 

as destination for PING detection, DNS server of WAN port will be

 

selected as destination for DNS Lookup. In Manual Mode, you can

 

configure the destination for PING and DNS Lookup manually.

Ping:

Enter the destination IP for Ping in Manual mode. 0.0.0.0 means PING

 

detection is disabled.

DNS Lookup:

Enter the IP address of DNS server in Manual mode. 0.0.0.0 means DNS

 

Lookup is disabled.

 

-106-

Page 111
Image 111
TP-Link TL-R470T+ manual Online Detection,  Tracert, Detecting, Ping, DNS Lookup