 General,  Port Mirror | TP-Link TL-R470T+ guide

The following items are displayed on this screen:

General

Enable Port Mirror: Check the box to enable the Port Mirror function. If unchecked, it will be disabled.

Mode:Select the mode for the port mirror function. Options include:

Ingress: When this mode is selected, only the incoming packets sent by the mirrored port will be copied to the mirroring port.

Egress: When this mode is selected, only the outgoing packets sent by the mirrored port will be copied to the mirroring port.

Ingress&Egress: When this mode is selected, both the incoming and outgoing packets through the mirrored port will be copied to the mirroring port.

Port Mirror

Mirroring Port: Select the Mirroring Port to which the traffic is copied. Only one port can be selected as the mirroring port.

Mirrored Port: Select the Mirrored Port from which the traffic is mirrored. One or multiple ports can be selected as the mirrored ports.

The entry in Figure 4-16indicates: The outgoing packets sent by port 1, port 2, port 3 and port 5 (mirrored ports) will be copied to port 4 (mirroring port).

Tips:

If both the mirrored port and the mirroring port are the LAN ports, these two LAN ports should be in the same Port VLAN. For example, if port 3 (the mirroring port) and port 4 (the mirrored port) are the LAN ports, the Port Mirror function can take effect only when port 3 and port 4 are in the same Port VLAN.

-44-

Image 49

TP-Link TL-R470T+ manual  General,  Port Mirror

Contents

TL-R470T+ Load Balance Broadband Router Copyright & Trademarks FCC Statement 安全諮詢及注意事項 Safety Information Contents Glossary Hardware Specifications Package Contents Conventions Intended ReadersOverview of this Guide Page Overview of the Router  Easy-to-use FeaturesHardware Basic Functions Front Panel Appearance  Reset button  AC Power ReceptacleRear Panel  Interface Description Port Configure PC Quick Installation GuidePage Page Is the TCP/IP configuration for your PC correct? LoginIs the connection between your PC and the router correct? WAN Mode 11 WAN Connection Type 13 WAN Connection Type PPPoE Connecting Page 17 Configuration Completed Status Configuration WAN Mode Quick SetupNetwork 1 WAN  Static IP Static IP Primary DNS Default GatewaySecondary DNS Upstream Bandwidth  Dynamic IP WAN Dynamic IP Following items are displayed on this screen Unicast Get IP Address byUse the following DNS Server WAN PPPoE PPPoE Active Mode PasswordSettings Keep Alive Account Name ISP Address Service NameSecondary Connection Connection Type  PPPoE Status WAN L2TP L2TP Server IP  L2TP Settings Bandwidth Downstream Bandwidth Upstream L2TP Status Pptp Secondary Connections  Pptp Settings  Pptp Status BigPond  BigPond SettingsPage 2.1 LAN 2 LAN BigPond Status  LAN Dhcp Dhcp Client  Dhcp Settings  Dhcp Reservation Dhcp Reservation  List of Reserved Address Iptv Set the MAC Address for LAN port MAC AddressSet the MAC Address for WAN port Statistics Switch MAC Address Port  Statistics 15 Statistics Following items are displayed on this screen 16 Port Mirror Port Mirror  Port Mirror  General Application Example Rate Control  Port Config Port Config Rate Control Port Vlan Port Status Group User Group Port Vlan View User View  View Config Advanced NAT Setup1 NAT  Virtual Server Virtual ServerInterface Protocol  List of Rules Port Triggering  Port Triggering  ALG 1.4 ALG Traffic Control Setup323 ALG IPsec ALG  Interface Bandwidth Use Bandwidth Control Session Limit Session Limit  Session Limit Session List List of Session Limit Load Balance ConfigurationPolicy Routing WAN Link Backup 34 Link Backup Following items are displayed on this screen Protocol Static Route Routing Protocol  List of Protocol  Static Route 36 Static Route Following items are displayed on this screen Application Example  Network Requirements  Configuration procedure Anti ARP Spoofing FirewallIP-MAC Binding  IP-MAC Binding 38 ARP Scanning ARP Scanning ARP List Attack Defense Packet Anomaly Flood DefenseDefense MAC Filtering Enable AttackDefense Logs  MAC Filtering URL Filtering Access Control Object  URL Filtering Rule Web Filtering Access Rules Service  Access RulesPolicy  List of Rules  Service ServiceName Dest. Port  List of Service ServicesPPPoE Server GeneralPage Account IP Address Pool IP Address Pool  List of IP Pool  Account Account Name 48 Account Following items are displayed on this screen Exceptional IP Is 48. If Enable Advanced Account Features is not selected, List of Account  Exceptional IP List of Account List of Exceptional IP Interval Bulletin Content Enable LogsDynamic DNS Title 52 DynDNS Ddns DynDNS  Dyndns Ddns No-IP List of DynDNS Account  No-IP Ddns 53 NO-IP Ddns Following items are displayed on this screen  List of No-IP Account PeanutHull  PeanutHull Ddns Comexe List of PeanutHull Account  Comexe Ddns 55 Comexe Ddns Following items are displayed on this screen  List of Comexe Account UPnP List of UPnP Mapping Admin Setup MaintenanceAdministrator  Administrator Login Parameter Remote Management Management Factory DefaultsExport and Import  Remote Management  Configuration Version Reboot Export  Import Snmp Firmware Upgrade 64 Snmp Following items are displayed on this screen Interface Traffic Statistics StatisticsIP Traffic Statistics Interface Displays the interface IP Fragment Rx Diagnostics Diagnostics Traffic Statistics  IP Traffic Statistics  Ping 67 Diagnostics Following items are displayed on this screen  Tracert Online DetectionDetecting Ping Time TimePort Displays the detected WAN port Detection WAN Status Display the detecting results Get UTC Daylight Saving TimeManual Synchronize with Recurring Mode Predefined ModeDate Mode Logs Severity  List of LogsSend System Logs Level Description NAT Table  Filter SettingLevel Description Debugging  NAT TablePage Ports PowerTransmission Medium LEDs Appendix B FAQ Page Glossary Description Appendix C Glossary Allows dissimilar communication devices to communicate Port or device that connects to a LAN. Other devices Glossary Description