Choose the menu Maintenance→SNMP→SNMP to load the following page.
Figure
The following items are displayed on this screen:
General
SNMP:Enable or disable the SNMP function.
Device Name: Enter the name of the router.
Location:Enter the location of the router.
Contact:Enter the name of the network administrator for the router, as well as a contact number or an
Get Community: Enter the password that allows
Set Community: Enter the password that allows read/write access to the router’s SNMP information. The default password is private.
SNMP Trusted Host: You can restrict access to the router’s SNMP information by IP address. Enter the IP address of the SNMP Trusted Host, which is allowed to access the router’s SNMP information. If this field is left blank, then access from any IP address is permitted.
