Application Example  Network Requirements | TP-Link TL-R480T+

The first entry in Figure 4-38indicates: If there are packets being sent to a device with IP address of 211.162.1.0 and subnet mask of 255.255.255.0, the router will forward the packets from WAN1 port to the next hop of 211.200.1.1.

Application Example

Network Requirements

LAN1 is under the router and it uses network segment 192.168.0.0 /24. LAN2 and LAN3 are under a layer 3 switch and they use network segments 192.168.2.0 /24 and 192.168.3.0 /24 respectively. The IP address of the cascading LAN port between the layer 3 switch and the router is 192.168.0.2. Now the hosts within LAN1 desire to access the hosts within LAN2 and LAN3.

The network topology is shown as the following:

Configuration procedure

1.On the Static Route page, add a static routing rule for LAN2 with destination address 192.168.2.0 (LAN2’s IP address) and next hop address 192.168.0.2 (IP address of the cascading LAN port) as shown in the following figure. Then click the <Add> button.

-72-

Image 78

TP-Link TL-R480T+ manual Application Example  Network Requirements

Contents

TL-R480T+ Load Balance Broadband Router Copyright & Trademarks FCC Statement Safety Information 安全諮詢及注意事項 Contents Hardware Specifications 119 120 Glossary 122 Appendix C Package Contents Intended Readers ConventionsOverview of this Guide Page Overview of the Router Hardware Features Easy-to-use Basic Functions Appearance Front Panel Rear Panel  Reset button AC Power Receptacle  Interface Description Port Quick Installation Guide Configure PCPage Page Login Is the TCP/IP configuration for your PC correct?Is the connection between your PC and the router correct? WAN Mode 11 WAN Connection Type Page Page 17 Configuration Completed Configuration Status Network Quick SetupWAN Mode 1 WAN Static IP  Static IP Secondary DNS Default GatewayPrimary DNS Upstream Bandwidth WAN Dynamic IP Following items are displayed on this screen  Dynamic IP Use the following DNS Get IP Address byUnicast Server PPPoE WAN PPPoE Settings Keep Alive PasswordActive Mode Account Name Secondary Connection Service NameISP Address Connection Type  PPPoE Status L2TP WAN L2TP  L2TP Settings Server IP Upstream Bandwidth Downstream Bandwidth L2TP Status Pptp  Pptp Settings Secondary Connections  Pptp Status  BigPond Settings BigPondPage 2 LAN 2.1 LAN BigPond Status Dhcp  LAN  Dhcp Settings Dhcp Client Dhcp Reservation  Dhcp Reservation Iptv  List of Reserved Address MAC Address Set the MAC Address for LAN portSet the MAC Address for WAN port  MAC Address SwitchStatistics Port 15 Statistics Following items are displayed on this screen  Statistics Port Mirror  General Mirroring Port Mode Port Mirror Mirrored Port Rate Control Application Example Port Config  Port Config Rate Control Port Status Port Vlan User Group Group Port Vlan User View  View Config View NAT Setup Advanced1 NAT One-to-One NAT  One-to-One NAT List of Rules Multi-Nets NAT  Multi-Nets NAT Application Example  Network Requirements  Configuration procedure Interface Virtual Server Virtual Server Protocol Port Triggering  Port Triggering 1.6 ALG  ALG 323 ALG SetupTraffic Control IPsec ALG Is available to use  Interface Bandwidth Direction GuaranteedBandwidth Control Group Session Limit Session Limit Session List  Session Limit List of Session Limit Configuration Load BalancePolicy Routing WAN Link Backup 36 Link Backup Following items are displayed on this screen Protocol  Protocol RoutingStatic Route  List of Protocol 38 Static Route Following items are displayed on this screen  Static Route Application Example  Network Requirements Firewall Anti ARP SpoofingIP-MAC Binding  IP-MAC Binding ARP Scanning 40 ARP Scanning Attack Defense ARP List Flood Defense Packet AnomalyDefense Defense Logs Enable AttackMAC Filtering  MAC Filtering Access Control URL Filtering  URL Filtering Rule Object Access Rules Web Filtering  Access Rules ServicePolicy  List of Rules Name Service Service Dest. Port  List of Service App ControlControl Rules Database  Control RulesApplication Services PPPoE ServerGeneral Page  IP Address Pool IP Address PoolAccount  List of IP Pool 52 Account Following items are displayed on this screen  Account Account Name Is 48. If Enable Advanced Account Features is not selected, Exceptional IP List of Account List of Account  Exceptional IP List of Exceptional IP Bulletin Interval Dynamic DNS Enable LogsContent Title DynDNS 56 DynDNS Ddns No-IP  Dyndns Ddns List of DynDNS Account 57 NO-IP Ddns Following items are displayed on this screen  No-IP Ddns PeanutHull  List of No-IP Account Comexe  PeanutHull Ddns List of PeanutHull Account 59 Comexe Ddns Following items are displayed on this screen  Comexe Ddns UPnP  List of Comexe Account List of UPnP Mapping Administrator MaintenanceAdmin Setup  Administrator Login Parameter Remote Management Export and Import Factory DefaultsManagement  Remote Management  Export Reboot Configuration Version  Import Firmware Upgrade Snmp 68 Snmp Following items are displayed on this screen IP Traffic Statistics StatisticsInterface Traffic Statistics Interface Displays the interface IP Fragment Rx  Traffic Statistics DiagnosticsDiagnostics  IP Traffic Statistics 71 Diagnostics Following items are displayed on this screen  Ping Detecting Online Detection Tracert Ping  List of WAN status TimeTime  Current Time Manual Daylight Saving TimeGet UTC Synchronize with Date Mode Predefined ModeRecurring Mode Logs Send System Logs  List of LogsSeverity Level Description Level Description Debugging  Filter SettingNAT Table  NAT TablePage Transmission Medium PowerPorts LEDs Appendix B FAQ Page Appendix C Glossary Glossary Description Allows dissimilar communication devices to communicate Port or device that connects to a LAN. Other devices Glossary Description