Trane WSC060-120 manual Control Options, Mechanical Specifications, Zone Sensors

Mechanical Specifications

Control Options

COMM3/4Trane Communications Interface

An option for a factory or field-installed Trane Communication Interface is available to allow twisted wire pair communication with an Integrated Comfort™ system.

Comm-5 LonTalk Communication Interface

This factory or field-installed option shall be provided to allow the unit to communicate as aTrane Comm-5 device or directly with generic LonTalk Network Building Automation System Controls.

Zone Sensors

This field-installed option shall be provided to interface with the micro equipped Precedent and shall be available in either manual, automatic, programmable with night setback, with system malfunction lights or remote sensor options.

Differential Pressure Switches

These factory or field-installed options allow for individual fan failure and dirty filter indication.The fan failure switch will disable all unit functions and “flash” the Service LED on the zone sensor.The dirty filter switch will light the Service LED on the zone sensor and will allow continued unit operation.

Reference Enthalpy Control

Replaces the dry bulb control with a wet bulb changeover controller which has a fully adjustable set point. Enthalpy control offers a higher level of comfort control, along with energy savings potential, than the standard dry bulb control.This is due to the additional wet bulb sensing capability.This option can be field-installed or factory-installed with the factory- installed economizer.

Differential Enthalpy Control Replaces the standard dry bulb control with two enthalpy sensors that compare total heat content of the indoor air and outdoor air to determine the most efficient air source.This control option offers the highest level of comfort control, plus energy efficiency, available.This option can be field-installed or factory- installed with the factory-installed economizer.

PKGP-PRC004-EN 49