Cannot hear track playback

1.Have you downloaded any music files onto the Digital Music Player? If no, then you must first do so from your computer or the Internet. (Only Mpeg I Layer 3 and WMA files compressed at a rate of 32Kbps–320Kbps are supported.)

2.Are the earphones properly connected to the earphones jack? If not, reconnect them.

3.Is the volume loud enough? If not, increase the volume level until the music can be heard.

Track name does NOT display correctly on the screen

1.The default language of the Digital Music Player is English. Please set the language option first.

2.ID3 tag information has display priority on the screen of the Digital Music Player. You could modify the ID3 tag by using Windows Media Player or Winamp.

3.If the ID3 tag is empty, just the file name will be displayed on the screen.

Cannot enter the RECORD Mode

To make sure the recorded file will not be lost, two safety mechanisms are provided.

1.If the remaining battery capacity is less than 10%, you cannot enter the RECORD Mode.

2.During recording, if the remaining battery capacity goes below 10% the MP630 will automatically save the recording.

Track playback sounds intermittent

Plug the earphones into the earphones jack again to make sure they are properly connected.

Digital Music Player Powers OFF automatically

MP630 features a SLEEP Mode, which acts as a Power Saving feature. You can preset your Digital Music Player to Power OFF automatically after 15, 30, or 60 minutes. Please refer to the “Sleep” section in SETTINGS.

Digital Music Player just isn’t working properly

If your Digital Music Player ever stops working properly, or locks up, try Powering it ON and OFF a few times, if this does not correct the problem you can Reset the unit by pressing the “Reset” button for 3 to 5 seconds. If all of these options fail you can restore your Digital Music Player to its Default Factory Settings by using the “Recovery Function.”

Cannot find the file that was just copied to the Digital Music Player

Re-copy the file and refer to the “Disconnecting from a Computer” section to remove the Digital Music Player after the copy process is completed.

A File that was just deleted still appears

Re-delete the file and refer to the “Disconnecting from a Computer” section to remove the Digital Music Player after the delete process is completed.

Digital Music Player automatically removed from the operating system

This problem occurs when you press the “Volume Down” button while your Digital Music Player is still connected to a Computer USB port. Unplug your Digital Music Player from the USB port and plug it back in again.

53

Troubleshooting

Page 57
Image 57
Transcend Information TS4GMP630, TS2GMP630 user manual Track playback sounds intermittent