Step 4: Save and Restart
The Setup wizard is now completed. The new settings will be take effect after the Access Point has restarted. Please click “Restart” to save the new configuration and reboot the Access Point. Click “Exit” to quit without making any changes. Users also can go back to modify the setting by clicking “Back”.
Status
This page shows the following information.
Firmware Version: Shows the current firmware version and released date code.
LAN: Shows the Mac address, IP address (default: 192.168.10.100), Subnet Mask and Gateway Address. The current LAN traffic calculated in terms of number of packets sent and received by the AP through a wired connection is also displayed.
12
