TRENDnet TW100-BRF114U manual Other Unix Systems, Printing Setup on Linux, Field Data Example

PC Configuration

Printing Setup on Linux

The TW100-BRF114U supports LPD Printing on Linux. The procedure to install a LPD printer is detailed below, but may vary according to your version of Linux and X -windows shell.

1.In your X Windows shell, select Control Panel, then Printer Configuration.

2.Select Add. For the printer type, select Remote Unix (lpd) Queue.

3.Use the following data to complete the resulting dialog.

Field	Data	Example
Name	Enter a name for this printer	gw_prn
Spool Directory	/var/spool/lpd/printer_name	/var/spool/lpd/gw_prn
	Where printer_name is the "Name"
	entry above.
File Limit	Enter a suitable number.	0 (no limit)
Remote Host	TW100-BRF114U's IP address	192.168.0.1

Note:

If you have made a host file entry, you can use the name from the host file instead of the IP Address.

Remote Queue L1 L1

4.Save this data, and exit the Printer Configuration. Configuration is now completed, and the printer is now available for use.

Other Unix Systems

To access the Internet via the TW100-BRF114U:

•Ensure the "Gateway" field for your network card is set to the IP Address of the TW100- BRF114U.

•Ensure your DNS (Name Server) settings are correct.

Printing Setup

To use LPD printing to the TW100-BRF114U's printer, install an LPD printer using the standard procedure for your system.

•Use the TW100-BRF114U's IP Address as the location of the remote host

•Use L1 for the name of the printer on the remote host.

37