Broadband Router User Guide
Options
This screen allows advanced users to enter or change a number of settings. For normal opera- tion, there is no need to use this screen or change any settings.
An example Options screen is shown below.
Figure 47: Options Screen
Data - Options Screen
Backup DNS |
|
IP Address | Enter the IP Address of the DNS (Domain Name Servers) here. These |
| DNS will be used only if the primary DNS is unavailable. |
TFTP |
|
Enable Firm- ware Upgrade using TFTP
UPnP
Enable UPnP Services
Allow Configu-
ration...
•If enabled, TFTP (Trivial FTP) can be used to upgrade the firm- ware in this device. This is normally not required; a Windows utility is available for this purpose.
•You must obtain the firmware upgrade file first; instructions for using TFTP will be available with the upgrade.
•UPnP (Universal Plug and Play) allows automatic discovery and configuration of equipment attached to your LAN. UPnP is by supported by Windows ME, XP, or later.
•If Enabled, this device will be visible via UPnP.
•If Disabled, this device will not be visible via UPnP.
•If checked, then UPnP users can change the configuration.
•If Disabled, UPnP users can only view the configuration. But currently, this restriction only applies to users running Windows XP, who access the Properties via UPnP. (e.g. Right - click the Broadband Router in My Network Places, and select Properties)
72
