Broadband Router User Guide

Connection Status - PPPoE

If using PPPoE (PPP over Ethernet), a screen like the following example will be displayed when the "Connection Details" button is clicked.

Figure 28: PPPoE Status Screen

Data - PPPoE Screen

Connection

 

Physical Address

The hardware address of this device, as seen by remote devices

 

on the Internet. (This is different to the hardware address seen by

 

devices on the local LAN.)

IP Address

The IP Address of this device, as seen by Internet users. This

 

address is allocated by your ISP (Internet Service Provider).

Network Mask

The Network Mask associated with the IP Address above.

PPPoE Link Status

This indicates whether or not the connection is currently estab-

 

lished.

 

• If the connection does not exist, the "Connect" button can be

 

used to establish a connection.

 

• If the connection currently exists, the "Disconnect" button

 

can be used to break the connection.

Connection Log

 

Connection Log

• The Connection Log shows status messages relating to the

 

existing connection.

 

• The most common messages are listed in the table below.

40

Page 44
Image 44
TRENDnet TW100-BRF114U manual Connection Status PPPoE, Data PPPoE Screen, Connection Log