Operation (continued)

Normal Operation

Display Information Parallel Mode (12kVA model only):

PARALLEL MODE 00.00KW / 000%

PARALLEL: MASTER 00.00KVA / 000%

 

INPUT VOLTAGE 000V / 00.0Hz

 

BYPASS VOLTAGE

000V / 00.0Hz

 

OUTPUT VOLTAGE

000V / 00.0Hz

 

BATTERY CAPACITY

000V / 000%

 

REMAINING TIME

0000 MINUTES

 

ON-LINE 6KVA

V00 CV01

NOTE: When two units are connected in parallel, the

“Master UPS” will display “PARALLEL: MASTER” in this second screen. The display on the “Secondary UPS” will read “PARALLEL: SLAVE”. If the two units are not paralleled successfully, both units will read “STANDALONE” in this second screen.

UPS Setup Menu

Press the UPh and DOWNi buttons simultaneously for 3 seconds until the SETUP MENU screen appears as seen below:

UPS SETUP

EXIT ENTER

Press the UPh button to enter Set Up Mode.

To enter Set Up Mode, you will be required to enter a password.

PASSWORD : 0000

ENT DOWN UP XX

Numbers increase or decrease by 1 when pressing the UPh and DOWNi buttons (0-9). Scroll to select the first number, then press the ON button. This saves the first number and moves on to the next in the sequence. The password range is 0000-9999 and should be changed by the administrator. The DEFAULT password is 1234.

18

201207113 933070.indb 18

9/17/2012 1:20:08 PM

Page 18
Image 18
Tripp Lite 5KVA-6KVA owner manual UPS Setup Menu, Display Information Parallel Mode 12kVA model only