Troubleshooting
TROUBLESHOOTING
| Problem | Cause | Solution |
No AC output is available, but engine is running.
When loads are connected, engine runs good but bogs down.
Engine shuts down during operation.
Engine lacks power.
I. Circuit breaker is open.
2.Poor connection o r defective cord set.
3.Connected device is bad.
4.Fault in generator.
I.Short circuit in a connected load.
2.Generator is overloaded.
3.Engine speed is too slow.
4.Shorted generator circuit.
Out of gasoline.
Load is too high.
I.Reset circuit breaker.
2.Check and repair.
3.Connect another device that is in good condition.
4.Contact Authorized Service Facility.
I.Disconnect shorted electrical load.
2.See "Don'tOverload Generator".
3.Contact Authorized Service Facility.
4.Contact Authorized Service Facility.
Fill fuel tank.
See "Don'tOverload Generator".