Care And Maintenance Table Of Contents |
| |
MAINTENANCE SCHEDULE |
| |
| LUBRICATION | |
| DAILY CARE | |
| WEEKLY CARE | |
| MONTHLY CARE | |
| QUARTERLY CARE | |
EXPLODED DIAGRAMS |
| |
| WIRING DIAGRAMS | |
| EXPLODED | |
| PARTS | |
TROUBLESHOOTING FLOWCHARTS |
| |
| DIAGNOSTICS/ERROR MESSAGES | |
| NO DISPLAY | |
| NO BELT MOVEMENT | |
| CIRCUIT BREAKER TRIPS AT START UP | |
| TREADBELT STOPS DURING WORKOUT | |
| SPEED FLUCTUATION | |
| INCLINE MALFUNCTION | |
| E3:EEPROM ERROR | |
| HEART RATE NOT FUNCTIONING | |
TEST PROCEDURES |
| |
| CALIBRATION | |
| GROUNDED OUTLET | |
| AMP DRAW | |
| SPEED SENSOR | |
| VOLTAGE TO DRIVE MOTOR | |
| DRIVE MOTOR | |
| DRIVE BELT TENSION | |
| TREADBELT TENSION | |
| INCLINE POTENTIONMETER | |
| VOLTAGE TO INCLINE MOTOR |
Maintenance Schedules |
LUBRICATION
True Commercial Series Treadmills are self lubricating and do not require you to apply wax to the deck or belt.
It is important to inspect the Autowaxer lubrication system at least once every 6 months to ensure that it is not worn through the wax channel and damaging the treadbelt.
Lay the unit on the side and visually inspect the Autowaxer mounted to the underside of the deck. At least 1/2 inch should remain on the wax channel. If not, replace the wax channel.
| ✔ |
|
|
| Lay | Over | |
| On |
| |
V | Side | ||
✔ | isual |
|
|
|
|
| |
Inspection |
|
|