Tunturi F35, F30 owner manual Place the support under the rear part of the frame

O W N E R ’ S M A N U A L • F 3 0 • F 3 5

REAR SUPPORT

1.Place the support under the rear part of the frame.

2.Fasten it with two hex screws and washers.

HANDLEBAR AND

HANDLEBAR SUPPORT TUBE

1.F30: Adjust the resistance knob to position 8. Steer the brake wire from the handlebar support

tube into the loop in the upper part of the brake wire outlet from the frame tube.

2.F30: Screw the wire ends into each other.

3. Attach the wires from the frame tube and the handlebar support tube. Push the handlebar support tube into place inside the frame tube.

NOTE! The fastening screws are ready-mounted, so please do not loosen them.

4.Use the enclosed Allen key to tighten both fastening screws through the holes in the tube.

NOTE ! Tighten the fastening screws by turning them counter-clockwise. And not too tight!

5.Pull the wire from the handlebar supprt tube slightly upwards and loosen the fastening screw at the end of the handlebar support tube. Insert the handlebar into the upper end of the handlebar support tube and fasten it by tightly screwing the fastening screw. Be careful not to damage the meter wire!

4