Turbo Chef Technologies Tornado 2 owner manual Enter Cook Time Screen

18 o per a t i n g the Tornado Oven

WARNING: Inside of oven is HOT! Insert food with caution.

c.Close the oven door and press the bottom-left soft key to test the new settings.

d.Follow steps 5-8 in the section titled cooking instructions, pages 15-16.

9.Press the bottom-right soft key to save the new settings. Doing so will permanently replace old item settings.

10.When done editing recipes, press the back key until returned to the cooling down or oven off screen.

Ch a n g i n g the idle ir Set Temperature

WARNING: The idle IR set temperature is pre-determined by the menu developer. Changing this setting is not recommended, unless performed by the menu developer or TurboChef Culinary or Engineering staff.

Valid idle IR settings range between 500-1150ºF (260-620ºC). The temperature will be rounded to the nearest 50ºF (20ºC) increment.

To change the idle IR set temperature:

1.From the cooling down or off mode, simulta- neously press the back and enter keys.

2.Enter the code 9-4-2-8 (W-H-A-T) and press enter.

3.Press the down key to scroll to screen 2 of the test mode.

4.Press the soft key adjacent to “IR SI” (bottom- right soft key) and press enter.

5.Using the Numeric Keypad, enter a new idle IR set temperature.

6.Press enter to confirm the change.

7.Continually press the back key to return to the cooling down/off mode.

As a general rule, the idle IR set temperature should be the average of all food item IR set temperatures (typically 1000ºF). This prevents the IR element from having to drastically warm up or cool down between cook cycles.

enabling/Disabling the Edit Mode

The edit mode can be disabled to prevent unauthorized editing of food items/cook cavity set temperature.

To enable/disable the edit mode:

1.From the cooling down or off mode, simultaneously press the up and down keys.

2.Enter the code 8-4-3-3 (T-I-D-E) and press enter.

3.When prompted, pressing “9” will enable edit mode. Pressing any other numeric key will disable edit mode.

cooking options - time, done, and snooze

The “Enter Cook Time” Screen

Enable the enter cook time screen to provide the option to change the cook time of a recipe before a cook cycle initiates (see page 15).

To enable/disable the enter cook time screen:

1.From the cooling down or off mode, simulta- neously press the back and enter keys.

2.Enter the code 8-4-6-3 (T-I-M-E) and press enter.

3.When prompted, pressing “9” will enable the enter cook time screen. Pressing any other numeric key will disable the enter cook time screen.