TVGuardian DRM-2001G Timer Recording, Setting up the input source, Set up the recording mode

Timer Recording

You can set-up the unit to schedule recordings to begin and end at a specific time. You can record to the hard drive or directly to a DVD. This feature is useful if you know the specific quality, time, date, and channel of a program you want to record in advance.

1.Press the “TIMER” button to enter the timer recording schedule setup menu, as shown in the chart to the right. There are 8 records in this menu. Each record represents a recording schedule.

2.In the timer recording setup menu, use the ▲ or ▼ button to select a record, and press the “OK” button.

Setting up the input source:

In the Item Editor dialog box, use the ▲ or ▼ and “OK” buttons to select the value of “SOURCE”

Setting up the recording quality:

In the Item Editor dialog box, use the ▲ or ▼ and “OK” buttons to select the recording quality. For more information about recording quality, for reference: HQ, SP, SP+, EP, LP, SLP.

Set up the recording mode:

This setting is done with the third control unit in “Item Editor” dialog box. Move the cursor ▲ or ▼ to select the row, and press the “OK” button to initiate the drop-down menu. The settings are as follows:

Weekly: recording every week.

Daily: recording everyday

Once: recording on a certain date

Setting up the recording date:

•If you select “Weekly” press the “OK” button to confirm. Move the cursor to the right and press the “OK” button to pop up a week list, as shown in the chart. Select the day(s) you want to record.

•If you select “Once” press the “OK” button. The date input editor box will appear on the right. Highlight the box and press the “OK” button, and then use the number buttons to enter the date in the form of “DD/MM/YY” press the “OK” button to confirm. If the input is invalid, the system will prompt an input error message. At the same time, the “Date Input Editor Box” will be left empty. Please enter the date again.

24