TVGuardian DRM-2001G manual Save, Option

Hard Disc Drive Play Mode

You can navigate in Time Shifting mode and control the audio by using the following remote control keys:

KEY	RESULT	NOTE
CH +/-	Change the channel	By default, changing the channel will
		erase all Time Shifting required for the
		current channel.
0-9	Change the channel
FF	Fast Forward (Press to cycle through
	4, 8, 32 x speeds.)
Slow	Slow Forward (Press to cycle through
	1/2, 1/4, 1/8 x speeds.)
Replay	Jump back 10 seconds	Arrow left key
		If you hold the left arrow key for 2
		seconds, the unit will jump back 10
		seconds
Skip	Jump forward 30 seconds	Arrow right key
		If you hold the right arrow key for 2
		seconds, it will jump to the end of the
		buffer (live recording)
Mute	Mute audio on/off
VOL +/-	Decrease/increase volume

Save

In order to save from within the Time Shifting buffer, two options are available:

Option 1:

While viewing a program, press “REC”. This will start saving the segment you are watching. You can extend the amount of recording time during the saving operation, by pressing “REC”. You will increase the length of the program you are saving by 30 minutes up to a maximum of 3 hours. Press STOP to indicate the end of the saving operation. The saved part of the time shifting buffer will be tagged in red.

Option 2:

While viewing a program, press “REC” and hold down for 3 seconds. This will save the entire time shifting buffer. If “STOP” is pressed, the saving will terminate at that point in the buffer. During the saving operation, pressing “REC” will increase the length of the program you are saving by 30 minutes up to a maximum of 3 hours. Press Stop and hold for 3 seconds if you want to cancel the entire saving operation.

Notes:

•You cannot change the channel or the source if saving is on-going (the end of the recording segment is either not entered, or in case of long recordings, it has not been reached). Saving has to be manually stopped first (by pressing STOP). The product will request you to stop saving first. The segment will be saved on HDD and then channel or source change can be performed.

•Only one segment in the time shifting buffer can be identified for saving. You cannot store multiple segments. Once the segment has been saved and registered on title list, this segment (and its preceding video segment) will be removed from the time shifting buffer.

•The saved program will be removed from the time shifting buffer when Stop is pressed. The unit will save immediately if the system is powered down.

35