Barcode Scanner, Testing the FPR | Tyco Electronics 15D1 manual

Testing the FPR

1.Double-click the Fingerprint Reader Test icon to start the test application.

2.Place your finger on the fingerprint reader sensor and verify that the image of your fingerprint is displayed on the application window.

Barcode Scanner

There are two types of optional USB barcode scanners: 1-D or omni-directional. The barcode scanner is only an option if the speaker bar is present.

When a scanner is chosen, a USB-SSI (Simple Serial Interface) converter board is included. Both barcode scanners are powered with the USB interface.

One-dimensional scanner specifications:

∙Ability to generate 1-D scanning pattern

∙Low-cost solution

∙USB powered

∙Easy communication between host and scanner

15D1 TOUCHCOMPUTER USER GUIDE 25

Image 30

Tyco Electronics 15D1 manual Barcode Scanner, Testing the FPR

Contents

Series Touchcomputer User Guide Elo TouchSystems Series Touchcomputer User Guide E674343 Elo TouchSystems Elotouch Copyright 2010 Tyco Electronics. All Rights Reserved DisclaimerTrademark Acknowledgments Table of Contents Display Screen Specifications Setup Unpacking Your Touchcomputer Adjusting the Display Setting Up the Operating System Select the Regional Options tab 15D1 Touchcomputer User Guide Injecting the Languages For Windows 7 Only Select Repair your computer Click Inject Selected Language Selecting the Region For Windows 7 Only Click Exit Exit Restart Selecting the Update Options For Windows 7 Only Choosing the Computer Name For Windows 7 Only Testing Peripherals Reviewing the Time and Date Settings For Windows 7 Only Calibrating the Touchscreen Securing the Base Advertising Brackets 15D1 Touchcomputer User Guide Operation On-Screen Display OSD OSD Menu To enable or disable the OSD function OSD and Power Button ControlBase Power Status LED To enable or disable the power button PWR lock function Head Power Status LED Touch Power Status LEDHDD Activity LED Using the Input/Output Panel 15D1 Touchcomputer User Guide Number Port Description Options and Upgrades Adding Optional Peripherals Magnetic Stripe Reader MSR Testing the MSR Testing in USB MSR Keyboard KB Emulation ModeTesting in USB MSR Human Interface Device HID Mode Customer Display Feature Specification Fingerprint Reader FPR Testing the FPR Barcode Scanner Enabling 2-D Scanning Testing the Barcode Scanner Click Start Control Panel COM value USB serial port Param Number Permanent Param Change New Value Wireless Card Testing the Wireless Card Third-Party Peripherals Testing the Cash Drawer PortSolid State Drive Printer Port Additional Hard Drives Safety and Maintenance Safety Care and Handling Click Recover Start Recovery Process Recovering the Operating SystemSelect OS Recovery Weee Directive Following UI shall be presented After finished, click Exit Exit Restart 15D1 Touchcomputer User Guide USB Serial Port COM5 Change to COM3 Location Information Select Port Settings Click Advanced… Hardware changes Technical Specifications Touchcomputer Specifications Bios AMI Feature Description Feature Description Connector Specifications Printer Power Input Pin DefinitionSerial Ports Cash Drawer Port Signal Definition Cash Drawer Port SpecificationsSerial Port Power Selection Cash Drawer Port Power Selection Display Screen Specifications Displays an out of range warning Display Screen Specifications Environmental Specifications Feature Specification Using the Touchcomputer Using the WebTechnical Assistance Using the Phone Electrical Safety Information II. Emissions and Immunity Information 15D1 Touchcomputer User Guide III. Agency Certifications Warranty 15D1 Touchcomputer User Guide Index Page Getting in Touch with Elo