Solid State Drive, Third-Party Peripherals | Tyco Electronics 15D1

Solid State Drive

A solid state drive can be added to (or used to replace) the original hard disk drive. This addition provides additional performance and more mechanically reliability in harsh environments.

Part number: E536242

Third-Party Peripherals

The D-Series touchcomputer includes two pre-configured ports for a printer and cash drawer. These peripherals are not available from Elo TouchSystems.

Printer Port

A 24VDC printer power port to connect a compatible receipt printer is provided. The 24VDC printer power cable is Elo Part number E337867.

Cash Drawer Port

We provide a standard RJ11 port to attach a cash drawer.

Testing the Cash Drawer Port

1.Connect the cash drawer to the touchcomputer using a cable with the correct wiring definition.

2.In the 1xDx Test Applications folder on the desktop, double-click the FD2XX Test icon to start the test program. The screen displays “Display is open.”

15D1 TOUCHCOMPUTER USER GUIDE 31

Image 36

Tyco Electronics 15D1 manual Solid State Drive, Third-Party Peripherals, Printer Port, Cash Drawer Port

Contents

Series Touchcomputer User Guide Elo TouchSystems Series Touchcomputer User Guide E674343 Elo TouchSystems Elotouch Copyright 2010 Tyco Electronics. All Rights Reserved DisclaimerTrademark Acknowledgments Table of Contents Display Screen Specifications Setup Unpacking Your Touchcomputer Adjusting the Display Setting Up the Operating System Select the Regional Options tab 15D1 Touchcomputer User Guide Injecting the Languages For Windows 7 Only Select Repair your computer Click Inject Selected Language Selecting the Region For Windows 7 Only Click Exit Exit Restart Selecting the Update Options For Windows 7 Only Choosing the Computer Name For Windows 7 Only Testing Peripherals Reviewing the Time and Date Settings For Windows 7 Only Calibrating the Touchscreen Securing the Base Advertising Brackets 15D1 Touchcomputer User Guide Operation On-Screen Display OSD OSD Menu OSD and Power Button Control Base Power Status LEDTo enable or disable the OSD function To enable or disable the power button PWR lock function Head Power Status LED Touch Power Status LEDHDD Activity LED Using the Input/Output Panel 15D1 Touchcomputer User Guide Number Port Description Options and Upgrades Adding Optional Peripherals Magnetic Stripe Reader MSR Testing the MSR Testing in USB MSR Keyboard KB Emulation ModeTesting in USB MSR Human Interface Device HID Mode Customer Display Feature Specification Fingerprint Reader FPR Testing the FPR Barcode Scanner Enabling 2-D Scanning Testing the Barcode Scanner Click Start Control Panel COM value USB serial port Param Number Permanent Param Change New Value Wireless Card Testing the Wireless Card Testing the Cash Drawer Port Solid State DriveThird-Party Peripherals Printer Port Additional Hard Drives Safety and Maintenance Safety Care and Handling Recovering the Operating System Select OS RecoveryClick Recover Start Recovery Process Weee Directive Following UI shall be presented After finished, click Exit Exit Restart 15D1 Touchcomputer User Guide USB Serial Port COM5 Change to COM3 Location Information Select Port Settings Click Advanced… Hardware changes Technical Specifications Touchcomputer Specifications Bios AMI Feature Description Feature Description Connector Specifications Printer Power Input Pin DefinitionSerial Ports Cash Drawer Port Specifications Serial Port Power SelectionCash Drawer Port Signal Definition Cash Drawer Port Power Selection Display Screen Specifications Displays an out of range warning Display Screen Specifications Environmental Specifications Feature Specification Using the Touchcomputer Using the WebTechnical Assistance Using the Phone Electrical Safety Information II. Emissions and Immunity Information 15D1 Touchcomputer User Guide III. Agency Certifications Warranty 15D1 Touchcomputer User Guide Index Page Getting in Touch with Elo