When a busy extension becomes available, the system is able to notify your extension. (See page 19 ‘Extension/C.O. Line Callback’)
When a busy C.O. Line becomes available, the system is able to notify your extension. (See page ‘Extension/C.O. Line Callback’)
If you are not using all 4 C.O. Lines, make sure you have disabled unused C.O. Lines.
MOH - Music on Hold
17
BASIC TELEPHONY OPERATIONS
Intercom Call
Intercom calls at the extension can be made by simply dialling the extension number. Operation:
1.Lift the handset - the dial tone is heard in the receiver.
2.Press (
2 
0 
0 
2 
1 
5 
( (200~215 means to choose one extension from 200 to 215) you wish to call.
3.Replace the handset to end the call.
Outside Call
There are two methods for placing an outside call.
Method 1: Obtaining an idle line for your outgoing call
Operation: 
0 
Telephone No.
1.Lift the handset - the dial tone is heard in the receiver.
2.Press 
0 
to obtain a free line for an
3.Press the telephone number you wish to call.
Method 2: Making a Direct LINE Selection
Operation: 8 | ( 1 4 | ( | Telephone No. |
1.Lift the handset - the dial tone is heard in the receiver.
2.Press 
8 
- dial tone stops.
3. | Press ( | 1 |
| 4 | ( to choose line 1 - 4 (C.O.1 - C.O.4) for an |
| call. |
| |||
4. | Press the telephone number you wish to call. | ||||
Call Transfer
You can transfer an outside call or an intercom call to a third party.
Operation: Flash | ) 2 0 0 |
| 2 1 5 )or 0 |
|
1.Press a flash after receiving or placing a call.
-The dial tone is heard in the receiver.
-The other party is placed on MOH.
2.Press the number of the third station.
3.If the third party responds, the call is transferred.
4.Replace the handset.
-The held line is released from MOH and connected to the third party extension.
-If you replace the handset before the third extension answers, the call
