Station Maximum Digit Restriction, Press 0 | Uniden 416 instruction

Station Maximum Digit Restriction

This feature designates maximum digits which each extension is allowed to dial out. (up to 99 digits).

Operation:

To RESTRICT station max. digit:

S 3

( 2 0 0 2 1 5

(

( 0 0		9 9	(	N

1.Set the MODE Switch on the right side of the unit to Set-Up Mode S

2.Lift the handset connected to Ext. 200 - the dial tone is heard in the receiver.


3.	Press	3		to enter the feature.
4.	Press the station number ( 2 0 0					2 1 5	(

5.	Press ( 0 0		9 9	( to enter the max. digit number. (max. 99 digits)

6.Replace the handset.

7.Set the MODE Switch on the right side of the unit to Business-Hour Mode

N

To FREE station max. digit restriction:

S

3

( 2 0 0 2 1

5

(

N

1.Set the MODE Switch on the right side of the unit to Set-Up Mode S

2.Lift the handset connected to Ext. 200 - the dial tone is heard in the receiver.

3.Press 3 to enter the feature.

4.Press the station number (200 to 215).

5.Press to free

6.Replace the handset.

7.Set the MODE Switch on the right side of the unit to Business-Hour Mode

N

31

Image 36

Uniden 416 manual Station Maximum Digit Restriction, Press 0, To Free station max. digit restriction

Contents

USER’S Page Contents Versatile Exchanger Settings Uniden UPBX416 Communication Centre Precautions Important Safety Instructions Features IntroductionUniden’s UPBX416 is ideal for small or home office use USER’S Included in your UPBX416 Package Installation Steps for Setting UpLines for no telephone call? Connecting Telephone Lines Connecting Telephone Lines to ExtensionsConnecting Power What is the Central Office C.O.? O. Lines used for telephone calls. default settingMode N System Programming When disabled To Check Time and Week OGM 3 When there is No Answer OGM 7 When Connecting to the OperatorRecording System OGMs Auto Attendant System OGMs Recording System OGMs Out Going Messages Operation SPress To select OGM number Setting Number of Rings Press 6 0 to enter the featureChecking System OGMs Out Going Messages Operation S 6 0 0 Password Registration Managing OWN Voice Mail BOXMusic-On-Hold Recording Station OGM Press Checking Station OGMManaging ICMs from a Local Telephone Managing ICMs From a Remote Telephone Remote Control OperationPress 2 to play ICM Press Telephone No. and # When Leaving Your Desk Receiving messagesCall NotificationCall Paging No. # Basic Telephony Operations Intercom CallOutside Call Method 1 Obtaining an idle line for your outgoing call Call Pick-Up Leaving a message after a call pick-upLeaving a message by extension Operation Flash Conference Call / 3-Way Calling Extension / C.O. Line CallbackOperation 6 Last Number Redial Call HoldCall Screen Caller will be placed on MOH Call Forwarding Call Forwarding to Extension NumberTo be called Call Forwarding OutsidePage Memory Dial Extension Memory Dial Input/OutSystem Memory Dial Input/Out To Dial OUT Setting the Off-Hour mode Method 1 by Mode SwitchMethod 2 by using telephone OGM 6 in the Off-Hour Setting the Business-Hour mode Default setting Urgent CallOperation To SET To SET S 6 7 # Auto-Attendant Mode Attendant ModePress 6 3 to enter the Attendant mode Operation S 6 3 # N Sub-Attendant Mode Multi-Attendant ModeAssigning Attendant Telephone Class Of Service COS Code Restriction Operation To Enter COS codePress to remove Replace the handset Station Class Of Service COS Code Restriction Press # to set Replace the handsetTo remove Station Maximum Digit Restriction Press 0To Free station max. digit restriction