Station Class Of Service COS Code Restriction | Uniden 416 manual

Station Class Of Service (COS) Code Restriction

The 3 restriction codes that you entered (see page 29) now need to be registered to each extension.

Operation:

To ENABLE station COS code restriction:

S

2

( 2 0 0 2 1 5

(

( 1 3

(

# N

1.Set the MODE Switch on the right side of the unit to Set-Up Mode (S).

2.Lift the handset connected to Ext. 200 - the dial tone is heard in the receiver.

3.Press 2 to enter the feature.

4.Press the station number ( 2 0 0 2 1 5 (

	5. Press (						( to enter the code number.
		1				3

6.Press # to set.

7.Replace the handset.

8.Set the MODE Switch on the right side of the unit to Business-Hour Mode

N

To DISABLE station COS code restriction

S 2 ( 2 0 0 2 1 5

(

( 1 3

(

N

1.Set the MODE Switch on the right side of the unit to Set-Up Mode (S).

2.Lift the handset connected to Ext. 200 - the dial tone is heard in the receiver.

3.Press 2 to enter the feature.

4.Press the station number ( 2 0 0 2 1 5 (

	5.	Press (								( to enter the code number. (max. 3 codes)
				1					3

	6.	Press				to remove.

7.Replace the handset.

8.Set the MODE Switch on the right side of the unit to Business-Hour Mode

N

30

Image 35

Uniden 416 manual Station Class Of Service COS Code Restriction, Press # to set Replace the handset, To remove

Contents

USER’S Page Contents Versatile Exchanger Settings Uniden UPBX416 Communication Centre Important Safety Instructions Precautions Uniden’s UPBX416 is ideal for small or home office use FeaturesIntroduction Included in your UPBX416 Package USER’S Lines for no telephone call? InstallationSteps for Setting Up Connecting Power Connecting Telephone LinesConnecting Telephone Lines to Extensions System Programming What is the Central Office C.O.?O. Lines used for telephone calls. default setting Mode N When disabled To Check Time and Week System OGMs OGM 3 When there is No AnswerOGM 7 When Connecting to the Operator Recording System OGMs Auto Attendant To select OGM number Recording System OGMs Out Going MessagesOperation S Press Operation S 6 0 0 Setting Number of RingsPress 6 0 to enter the feature Checking System OGMs Out Going Messages Recording Station OGM Password RegistrationManaging OWN Voice Mail BOX Music-On-Hold Managing ICMs from a Local Telephone PressChecking Station OGM Press Telephone No. and # Managing ICMs From a Remote Telephone Remote ControlOperation Press 2 to play ICM Call NotificationCall Paging When Leaving Your DeskReceiving messages No. # Method 1 Obtaining an idle line for your outgoing call Basic Telephony OperationsIntercom Call Outside Call Operation Flash Call Pick-UpLeaving a message after a call pick-up Leaving a message by extension Operation 6 Conference Call / 3-Way CallingExtension / C.O. Line Callback Caller will be placed on MOH Last Number RedialCall Hold Call Screen Call Forwarding Outside Call ForwardingCall Forwarding to Extension Number To be calledPage System Memory Dial Input/Out Memory DialExtension Memory Dial Input/Out To Dial OUT OGM 6 in the Off-Hour Setting the Off-Hour modeMethod 1 by Mode Switch Method 2 by using telephone To SET S 6 7 # Setting the Business-Hour mode Default settingUrgent Call Operation To SET Operation S 6 3 # N Auto-Attendant ModeAttendant Mode Press 6 3 to enter the Attendant mode Assigning Attendant Telephone Sub-Attendant ModeMulti-Attendant Mode Press to remove Replace the handset Class Of Service COS Code RestrictionOperation To Enter COS code To remove Station Class Of Service COS Code RestrictionPress # to set Replace the handset To Free station max. digit restriction Station Maximum Digit RestrictionPress 0