UNIDEN GUARDIAN LULLABOO FIRMWARE
OPERATION OVERVIEW
Your baby monitor uses Uniden Guardian Lullaboo firmware to operate a series of screens that lets you choose groups of operations. For example, when you tap on the camera icon in the Pop Up menus, you can set how you want the main viewing screen - called the Live screen - to display images from the paired cameras. You can scan between cameras, show all cameras on a single screen (Quad view), or only display a specific camera.
The Live screen lets you view the camera transmissions. It also lets you set up your screen display and make adjustments to it. Icons on the screen itself let you monitor power and camera status.
Lullaboo’s firmware always defaults to the Live screen in Quad mode after being idle for 2 minutes while in any other system screen. This default ensures that the system is ready to record video even if you forget to return to the Live screen. The system can only start a recording while in Live screen mode.
Live Screen
SD card | Battery | Internet | |
connection | |||
status | status | ||
status | |||
|
|
Pop up menus
Camera number/
Record Signal strength status
Motion status
Pop up menu tab
11
