Feature Highlights
•Trunk Tracking – Follows VHF High Band, UHF, 800MHz trunked public and government service systems just as if conventional
•
•500 Channels – Program one frequency into each channel. You must have at least one channel programmed to use the Scan mode.
•24 Bands, 10 Banks – Includes 24 bands, with Aircraft and 800 MHz.10 banks with 50 channels each are useful for storing similar frequencies to maintain faster scanning cycles or for storing all the frequencies of a trunked system.
•25
Note: The frequency coverage is not continuous and excludes the
•10 Priority Channels – You can assign one priority channel in each bank. Assigning a priority channel allows you to keep track of activity on your most important channel(s) while monitoring other channels for transmissions. You can also assign trunking priority talkgroups.
•Preprogrammed Service (SVC) Search – Allows you to toggle through preprogrammed Police, UHF CB, railroad, aircraft, and marine frequencies.
•Unique Data Skip – Allows your scanner to skip unwanted data transmissions and reduces birdies.
•Memory Backup – If the battery completely discharges or if power is disconnected, the frequencies programmed in your scanner are retained in memory.
•Manual Channel Access – Go directly to any channel.
•Attenuator – Reduces the signal strength on a per frequency basis.
•Turbo Search – Increases the search speed to 300 steps per second. This applies only to transmission bands with 5 kHz steps.
•Text Tags – You can customise your scanner by storing text tags (up to 16 characters).
•Auto Store – The scanner automatically arranges a memory store for searched frequencies.
•CTCSS/DCS – The scanner can receive and search for subaudible tones.
3
