ID Scan Mode
1. Press SCAN to begin scanning the lists you have programmed.
If you haven't programmed any IDs,ERROR appears for a few seconds.
2. To remove a Scan List from active scanning, press the number of the Scan List on your keypad.
The Scan List indicator turns off, and the IDs in that list are not scanned.
Note: One Scan List must always be active. If you try and deactivate all the Scan Lists, Scan List 1 will automatically be active.
3.To restore a Scan List to active scanning, press its number again.
4.Press SRCH to return to Trunk Tracking Search mode.
For motorola and EDACS system, to change your display between the Scan List indicators and trunk bank display, press SELECT.
For LTR systems only, the talkgroup must be active in order to change the scan list and bank indicators. If the talkgroup is not active, change the scan list by using the menu screen.
Note: • Once you press SCAN or SRCH in one bank, all trunking banks will change to that mode.
•Selecting a Scan List is also possible in the menu mode. (LTR only)
•ID SCANNING appears on the bottom of the screen during Trunk Scan instead of simply SCANNING.
40
