Changing the Priority Channel
You cannot eliminate the Priority Channel, but you can change it to any one of the 50 available channels in each bank.
1. Press MAN.
2. To select a new Priority Channel:
a. Enter the channel number. b. Then press MAN again.
MUTE
3. Press and hold PRI for two seconds to designate this channel as your new Priority Channel.
Two beeps indicate that the Priority
channel has been changed. The P icon appears in the display.
Note: • Priority in Trunking mode works just the same, except instead of setting priorities for channels, you set them for talkgroup IDs. The scanner only checks priority talkgroups between transmission, not in 2 second intervals.
•Priority scan is disabled while the TRUNK icon is lit (an error tone will sound if you try). To make it possible, turn off the TRUNK icon then press PRI.
•At Priority scan, it scans the designated Priority Channels in the banks you selected.
25
