Programming
Before the UBC780XLT can begin conventional scanning, you must program a frequency into at least one channel. Repeat this procedure for each channel you want to program.
Storing Frequencies into Channels
1.Select desired frequency.
Here is a list of sample frequencies you can try:
156.800 Marine Calling channel
468.400 Police Channel
476.425 UHF CB
2.Press MAN.
3.Select a channel.
a. Enter the channel number. b. Then press MAN.
4. Enter the frequency.
a. Enter the frequency number. b. Then press E.
Note: • To clear a mistake while entering the frequency, press | (decimal key) repeatedly |
until the display is cleared. |
|
• If you enter a channel or frequency which is out of the scanner’s range, a distinctive beep will sound and ERROR appears in the display.
•You can use ▲ or ▼ when selecting a channel.
Press and hold ▲ or ▼ for 1 second to move up/down more quickly.
18
