![](/images/new-backgrounds/1119243/11924335x1.webp)
Desktop Installation
You can place this scanner on a desk, shelf, or table to use it as a base station.
1. Flip up the feet for desk installation.
2. Extend the antenna to full vertical position. Adjust the angle for best reception.
Applying Power Using Standard AC Power
To power the scanner from an AC outlet, use the provided AC adaptor with a 5.5 mm outer diameter/2.1mm inner diameter tip.
Caution: You must use only the AC adaptor provided as power source that supplies
13.8V DC and delivers at least 700 mA. The cord connector’s centre tip must be set to positive and its plug must fit the scanner’s DC 13.8 V jack. Using an adaptor that does not meet these specifications could damage the scanner or the adaptor.
•Always connect the AC adaptor to the scanner before you connect it to AC power.
When you finish, disconnect the adaptor from the AC power before you disconnect it from the scanner.
1. Insert the adaptor’s barrel plug into the DC
13.8 V jack on the back of the scanner.
2. Plug the adaptor into a standard AC outlet.
Note: Use only the AC adaptor supplied with your scanner.
Connecting an External Speaker
In a noisy area, an external speaker (available at a local electronics store) positioned in the right place might provide more comfortable
listening.
Plug the speaker cable’s 1/8 inch (3.5 mm) plug into your scanner’s EXT. SP. jack.
Note: Connecting an external speaker disconnects the scanner’s internal speaker.
8