Names of Parts

Front Panel Facilities

Twin-DVD-drive model or single-DVD-drive model added PRA-DW11 (optional)

 

 

 

 

 

 

 

 

 

4

1

2

3

4

5

6

 

 

 

3

 

 

 

 

 

 

 

 

 

5

 

 

 

 

 

7

8

9

10 11 12

13

 

26 25

24

23

22

21

20

19

18 17 16 15

14

 

 

 

 

 

 

 

 

 

 

No.

Name

 

 

 

 

 

 

Function

 

1

STANDBY/ON button

 

When the unit is in the standby condition, pressing this button causes the

 

 

 

 

power to come on; the power indicator (to the left of the button) changes

 

 

 

 

from orange to green. The main display section indicates system startup.

 

 

 

 

After system startup is completed, the unit enters “idling condition,” and as

 

 

 

 

the unit’s display changes to show the current time, the STOP button lights.

 

 

 

 

When the unit is in the standby condition, if this button is pressed while

 

 

 

 

holding the STOP button depressed, the Function Menu’s setting values

 

 

 

 

will be reset to their factory defaults, and the power will then turn ON.

 

 

 

 

If the button is held depressed for one second or more when the unit is in

 

 

 

 

the idling condition, the unit will perform system shutdown, followed by

 

 

 

 

return to the standby mode (the power indicator will change from green to

 

 

 

 

orange). In the event operation becomes unstable and manual forced

 

 

 

 

shutdown is required, hold the button depressed for four seconds or more.

2

Display sections

 

 

 

 

 

 

 

 

3

PLAY/REC indicator

 

 

Lights to indicate operating state of DVD1/DVD 2 drive.

 

 

 

 

 

Appears green during PLAY mode, and orange during REC mode.

 

 

 

 

 

4

DISC indicator

 

 

Located to the right side of DVD1/DVD 2, this indicator light (orange) to

 

 

 

 

indicate that a disc is loaded. (*1)

 

5

EJECT button (0)

 

 

Press to open/close disc tray. The DISC indicator flashes from the time

 

 

 

 

the button is pressed until the disc tray closes fully.

 

 

 

 

 

6

Drive 2 cosmetic panel

 

This space is provided to allow the addition of a second DVD drive. When

 

 

 

 

an additional writer (PRA-DW11) is added here, it is considered “DVD2.”

 

 

 

 

Some models are factory equipped with twin-DVD-drive.

 

 

 

 

 

* For information on availability of twin-DVD models, consult your dealer.

7

DVD1, DVD2, HDD (Hard disk Drive)

These indicators light to show which drive has been selected with the

 

indicators

 

 

DRIVE SELECT button (the indicator for the selected drive lights green).

8

DRIVE SELECT button

 

Use to select the playback source and destination drive for recording. The

 

 

 

 

selection changes in the order HDD (Hard disk Drive) = DVD1 = DVD2

 

 

 

 

= DVD1&2. When a drive is selected, the corresponding indicator lights

 

 

 

 

(green). When DVD1&2 is selected, DVD1 is designated as the playback

 

 

 

 

source.

 

 

 

 

 

9

PREVIEW button

 

 

When this button is pressed with the unit in the idling condition, a

 

 

 

 

preview image/sound of the selected input (following encode and decode

 

 

 

 

processing) is supplied to all output connectors except DV; when the

 

 

 

 

button is pressed again, the unit returns to idling condition.

*1 A disc created on the PRV-LX1 that contains many titles may take dozens of seconds to recognize when loaded. The DISC indicator flashes and the disc recording and playback cannot be started during disc recognition.

14

PRV-LX1 En