Recording
Eject Setting
The operation performed at time of eject can be set using the [Eject Setting] command on the SETUP section’s [Operation] = [Control Setting] menu.
When set to “Eject”, the disc will be ejected immediately without finalization even during recording. When set to “Finalize&Eject”, when the eject command is received from an external controller at the remote control
Also, when using the front panel controls to eject a disc, if the drive for the EJECT button pressed is the same as the drive selected with the DRIVE SELECT button, a dialog box will appear asking whether you wish to finalize the disc.
Editing the Edit List
The contents that can be recorded on the edit list with this recorder are as follows:
The contents set with the APP section = [Auto Capture] = [IN/OUT Point] and [Chapter Point] commands are added to the edit list by pressing the Add to EDL button.
Also, the APP section = [Auto Capture] = [EDL Command] command can be used to add disc finalize and initialize commands and wait functions to the edit list as well. The wait function can be used to place EDL recording in REC pause mode when necessary, for example, to change the recording source’s VTR tape during EDL recording.
Note:
When recording to DVD, if the unit is left in the recording standby mode for 1 hour or more, the unit will automatically switch to STOP mode to prevent damage to the system.
APP section = [Auto Capture] = [EDL Command]
=[Command]
When selecting the APP section = [Auto Capture] = [EDL] command, the items entered on the edit list cannot be edited (changing order, deleting).
In particular, the contents set with the APP section = [Auto Capture] = [Chapter Point] command must be recorded as the next step after setting and recording the IN/OUT points where you wish to insert chapter marks.
If chapter points are set and recorded after earlier setting and recording multiple IN/OUT points, the chapter points will be added as an additional record at the end of the edit list, and thus must be changed to their proper order.
APP section = [Auto Capture] = [EDL]
Note:
When recording the edit list, the final IN/OUT point setting must be as follows: APP section = [Auto Capture] = [IN/OUT Point] = [Record As] command must be set to “Title(Stop)”.
APP section = [Auto Capture] = [EDL] items editing
(example 1)
APP section = [Auto Capture] = [EDL] items editing
(example 2)
The constructed edit list can be saved with a name (*.edl) created with the [Auto Capture] = [EDL SAVE] command on the APP section. Also, a saved edit list can be selected and loaded with the [Auto Capture] = [EDL Load/Delete] = [Load] command. To delete an edit list, using the [Auto Capture] = [EDL Load/Delete] = [Delete] command on the APP section.
41
En