Playing Discs

Other Playback Settings

The Function Menu’s SET UP section = [Playback] commands can be used to input default setups for playback on the PRV-LX1. These setup values cannot be changed during playback.

7Video Aspect Ratio [Video] = [Aspect] 4:3 (LB) / 4:3 (PS) / 16:9

Choose the aspect ratio setting in accordance with your television monitor. This setting is unnecessary when the unit is connected to a wide monitor.

Most DVD-Video prerecorded movies are designed for wide televisions, and recorded with screen aspect ratio of 16:9. Accordingly, when DVD-Video discs are viewed on ordinary conventionally sized television monitors, the image will appear vertically elongated in a ratio of 4:3. If this ratio is not desired, use the aspect ratio command to set the ratio to a more pleasing value.

7Still Video Mode [Video] = [Still Mode]

Auto / Frame / Field

Use this command to eliminate image shake and produce clearer still images when viewing still images of DVD-Video when progressive scan is turn OFF.

Auto:

Switches automatically between Field and Frame.

Frame:

The normal mode. Some shakiness may be evident when viewing images from scenes with movement.

Field:

Eliminates shakiness from still images.

Note:

When Still video mode is set to Field, menu messages will not appear clearly since only one field of image data is output.

7Audio Output Mode [Audio]

Use to select the type of digital signal supported by the amplifier connected to the unit. Be sure to set this correctly since incorrect settings may cause the generation of noise. Consult the Operating Instructions for your amplifier when making this setting.

Dolby Digital OUT

Dolby Digital / Dolby Digital = PCM

Dolby Digital:

Select when connecting an amplifier or decoder supporting Dolby Digital.

Dolby Digital = PCM:

Dolby Digital signals are converted to linear PCM before being output. Select this setting when connecting an amplifier that does not support Dolby Digital.

DTS OUT

ON/OFF

ON:

Select when connecting an amplifier or decoder that supports DTS.

OFF:

Select when connecting an amplifier or decoder that does not support DTS.

96 kHz PCM OUT

96kHz / Convert to 48 kHz

96 kHz:

Select when connecting an amplifier or DAC that supports 96 kHz.

Convert to 48 kHz:

96 kHz signals are down-sampled to 48 kHz and output. Select this setting when connecting an amplifier that does not support 96 kHz.

MPEG OUT

MPEG / PCM

MPEG:

Select when connecting an amplifier or decoder that supports MPEG.

PCM:

MPEG signals are converted to linear PCM for output. Select this setting when connecting an amplifier that does not support MPEG.

SET UP section = [Playback] = [Video]

50

SET UP section = [Playback] = [Audio]

PRV-LX1 En