Names of Parts
Rear Panel Facilities
1 | 2 | 3 | 19 | 4 | 5 | 6 | 20 | 7 | 8 | 9 | 10 |
|
|
|
|
|
|
|
|
| SIGNAL GND |
|
| 18 | 17 | 16 | 15 | 14 | 13 | 12 | 11 |
No. | Name |
|
|
| Function |
|
|
| |
1 | AC IN connector | Connect to power cord. |
|
|
|
|
|
| |
2 | Main power switch | When set to ON, the unit enters standby condition and front panel indicator | |||||||
|
| lights orange. |
|
|
|
|
|
| |
3 | AUDIO CH1/L CH2/R IN/OUT | Input/output connectors for analog audio CH1/L CH2/R signals. | |||||||
| connectors |
|
|
|
|
|
|
|
|
4 | Input/output connectors for | ||||||||
5 | COMPOSITE VIDEO IN/OUT | Input/output connectors for analog composite video signals. |
| ||||||
| connectors | Note: Use coaxial cables (impedance: | |||||||
6 | COMPONENT VIDEO IN/OUT | Input/output connectors for analog component video signals. (*1) | |||||||
| connectors | Note: Use coaxial cables (impedance: | |||||||
7 | DV connector | Connect to DV connector of professional use VTR or similar component. | |||||||
8 | Fan motor | Fan motor for cooling internal parts. |
|
|
|
| |||
9 | LTC connector (*2) | Connector for obtaining time code from VHS, VTR, etc. |
|
| |||||
|
| Note: Use a coaxial cable (impedance: | |||||||
10 | EXT SYNC IN and through | Use for connecting external sync signal, and for | |||||||
| Output connector | Note: Use coaxial cables (impedance: | |||||||
11 | Terminate switch | Use to terminate sync signal. Set to ON when used alone or when connected | |||||||
|
| to a terminating unit. |
|
|
|
|
|
| |
12 | SIGNAL GND terminal | Ground terminal for signals. When using the unit in environments exposed to | |||||||
|
| high levels of electronic noise, malfunctions may occur to mouse and other | |||||||
|
| control devices. In such cases, connect a ground wire between the | |||||||
|
| components to reduce the noise. This is not an electric safety ground. | |||||||
13 | REMOTE IN/OUT connectors | ||||||||
|
| with SONY format. (*3) |
|
|
|
|
|
| |
14 | PCM/2DIGITAL OUT connector | Digital audio output connector. |
|
|
|
|
| ||
|
| Note: Use a coaxial cable (impedance: | |||||||
15 | ETHERNET connector | Use for network connection. |
|
|
|
|
| ||
16 | MOUSE/KEYBOARD connectors | Allows connection of a USB mouse, USB keyboard and USB HDD to the unit. (*4) | |||||||
17 | VGA (GUI) connector | Connect to VGA monitor for expanded operation. (*5) |
|
| |||||
18 | UPS connector | Connect when using UPS. |
|
|
|
|
|
| |
19 | Expansion slot 1 | Provided to allow installation of the optional SDI AES/EBU input board (PRA- | |||||||
|
| BD11). |
|
|
|
|
|
|
|
|
| ÷ Consult your dealer regarding installation. |
|
|
| ||||
20 | Expansion slot 2 | Provided to allow installation of the optional SDI AES/EBU output board (PRA- | |||||||
|
| BD12). |
|
|
|
|
|
|
|
|
| ÷ Consult your dealer regarding installation. |
|
|
| ||||
16