Names of Parts
*1 Inputs are compatible with signal levels for both BETA and SMPTE (NTSC only). However, since outputs are based on DVD format, they differ from BETA and SMPTE levels. As a result, outputs should be used only for monitoring. See page 34 for input selection methods.
*2 LTC is not supported in drop frame mode.
*3 SONY is a trademark of Sony Corporation. Frame precision is not guaranteed when this unit is used as a playback unit for editing. This component does not support control from an editing machine.
*4 Functionality of connected devices is not guaranteed. If a USB hard disk drive is not recognized, or if operation is unstable, change to a hub supporting USB 2.0. If USB mouse and keyboard operation is unstable, try disconnecting and reconnecting the USB connector. If operation continues to be erratic, inquire your Pioneer dealer or one of the service centers listed at the end of this manual.
*5 The VGA output connector is provided for future expansion use; at present, the connector does not support the output of GUI display signals.
Remote Control Unit
|
| STOP |
| PLAY | 11 |
|
|
| 12 | ||
1 |
|
|
|
| |
REPEAT DISPLAY | PAUSE |
| 13 | ||
2 | RPT |
| STEP |
| |
3 | AUDIO |
| SCAN | 14 | |
4 |
| 15 | |||
|
|
|
| ||
5 | ANGLE | SUBTITLE | PREV | NEXT | 16 |
6 | MENU |
|
|
| 17 |
7 | TOP |
| ENTER |
|
|
8 | MENU |
|
| 18 | |
|
|
|
| ||
9 | SETUP |
|
|
| 19 |
10 | 1 | 2 | 3 | RETURN |
|
| 4 | 5 | 6 | TITLE/CHP | 20 |
| FRM/TIME | ||||
| 7 | 8 | 9 | FRM/TIME | 21 |
| 0 | >10 | CLEAR | SEARCH | 22 |
|
|
|
|
| 23 |
|
|
|
|
| 24 |
DXX2527
Load batteries into the remote control unit
Open the rear battery compartment cover and insert two AA batteries.
¶Insert the two batteries with + and – polarities aligned as indicated in the battery case.
Range of Remote Control Unit
When pressing the remote control unit’s buttons, point it toward the
¶The remote control unit may malfunction if strong sunlight or fluorescent light is allowed to strike the remote sensor directly.
No. | Name |
1 | REPEAT button |
|
|
2 | DISPLAY button |
3 | RPT |
| points) |
4 | AUDIO select button |
|
|
5 | ANGLE button |
6 | SUBTITLE button |
7 | MENU button |
8 | TOP MENU button |
|
|
9 | SETUP menu button *1 |
10 | Number buttons |
11 | STOP button (7) |
12 | PLAY button (3) |
|
|
13 | PAUSE button (8) |
14 | STEP / Slow buttons (e, E) |
15 | SCAN (fast forward/reverse) buttons (1, ¡) |
16 | Chapter skip NEXT button (¢) |
|
|
17 | Chapter skip PREV button (4) |
|
|
18 | Cursor buttons (5, 3, ∞, 2) |
|
|
19 | ENTER button |
20 | RETURN button |
21 | Title, chapter, frame, time button (TITLE/CHP/ |
| FRM/TIME) |
22 | Frame/time button (FRM/TIME) |
|
|
23 | SEARCH button |
24 | CLEAR button |
| *1 This key operates the same as the FUNCTION |
| button on the main unit. |
Note:
¶Do not mix new batteries with old.
¶Even batteries of the same type may display different voltage characteristics. As a result, do not mix batteries of different brands together.
¶If you do not plan to use the remote control unit for an extended period (one month or more), remove the batteries from the remote control unit to prevent potential damage from leakage of battery fluid. If battery leakage is discovered, remove and discard the batteries, and carefully wipe up any battery fluid from inside the compartment. Replace the old batteries with new.
¶When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area.
¶This remote control unit cannot be used for recording operations (recording start/pause/stop).
17