Univex PRV-LX1 manual 93

		Message Display
Item	Message	Comment
REC	Cannot record to different condition discs.	Simultaneous recording to two discs is possible only if they
		contain identical data.
	No Video Input.	No video input is connected. Check inputs.
	Confirm TV system of the video input.	Check input signal's TV system mode and mode set on
		Function Menu.
	Stopped automatically from Rec-Pause for the	When recording to DVD, REC-Pause is automatically switched
	system protection.	to STOP after 1 hour, to preserve system components.
	Stopped automatically because of no HDD	Insufficient remaining space on HDD, so stopped recording
	remaining caoacity.	automatically.
	Stopped automatically because of no DVD	Insufficient remaining space on DVD, so stopped recording
	remaining capacity.	automatically.
IN-OUT REC	OUT Point must be larger than IN Point + 1 sec.	An IN-OUT REC cannot be performed within 1 sec from IN
		point to OUT point.
	VTR(RS-422A) is not connected.	VTR (RS-422A) is not connected. Check also VTR settings.
	VTR(DV) is not connected.	VTR (DV) is not connected. Check also VTR settings.
	Stop operation is needed to finish IN/OUT	Previous auto capture is in pause mode. To end the auto
	recording.	capture, press the STOP button or execute “Record As Title
		(Stop) ” auto capture for recording stop.
EDL REC	EDLFILE OPEN ERROR	Failed attempt to load EDL file. File is either too big (max.
		2MB), or file may be damaged.
	Invalid target file name.	EDL file name is incorrect. See “About File Names” (page 94).
	Do you really want to load EDL:******	Confirm loading of EDL file.
	Do you really want to delete EDL:******	Confirm deletion of EDL file.
	EDLFILE ERROR not start PIONEER-DVDRec-EDL	Repair EDL file.
	EDLFILE ERROR not support EDL VER***	EDL file version *** is not supported.
	EDLFILE ERROR: line ** Syntax error 01	EDL file error
		Final REC must end with STOP command.
	EDLFILE ERROR: line ** Syntax error 02	EDL file error
		No command after the number.
	EDLFILE ERROR: line ** Syntax error 03	EDL file error
		REC before INI must end with STOP command.
	EDLFILE ERROR: line ** Syntax error 04	EDL file error
		REC cannot be performed after FNL.
	EDLFILE ERROR: line ** Syntax error 05	EDL file error
		Designate CHP after REC.
		CHP, T-N, C-N cannot be designated after WAI, INI, FNL or
		SET.
	EDLFILE ERROR: line ** Syntax error 06	EDL file error
		REC before FNL must end with STOP command.
	EDLFILE ERROR: line ** Syntax error 07	EDL file error
		Command not defined.
	EDLFILE ERROR: line ** Syntax error 08	EDL file error
		OUT Point must be larger than IN Point + 1 sec.
	EDLFILE ERROR: line ** Syntax error 09	EDL file error
		SET must be designated before REC-PAUSE.
	EDLFILE ERROR: line ** Syntax error 10	EDL file error
		TimeCode, Rate, Filter values are out of range.
	Total title num is over 99.	A DVD-Video disc can hold a maximum of 99 titles.
	Total clip num is over 255.	The maximum number of clips in a project is 255.
	More than 25f is carried out as 24f.	PAL has a frame rate of 24 fps. Check your entry.

¶“line**” indicates the line number in the EDL file. The EDL file begins with a single line header. Headers are omitted on lists displayed with the Function Menu’s APP Section = [Auto Capture] = [EDL] command, with the result that the

error line number in that case is displayed as “line**–1”. 93

PRV-LX1 En