Univex PRV-LX1 48

STEP STEP

Playing Discs

7Slow playback

During normal playback, hold the		/	button
depressed.
During slow playback, the playback speed can be
STEP	STEP	buttons.
adjusted by pressing the	and	buttons.

SLOWER	FASTER
STEP +	= STEP

STEP3 - STEP1 - 1/16 - 1/8 - 1/4 - 1/2 - 1/1

Note 1:

No sound is produced during slow playback.

Note 2:

The slow playback function cannot be used on discs displaying the “Operation Inhibited” message.

Note 3:

If a still image playback appears shaky, use the Function Menu’s SET UP section = [Playback] = [Video] = [Still Mode] command to switch to “Field”.

Note 4:

1/1 slow playback is not supported on DVD-Video discs.

Note 5:

When performing reverse slow-motion playback with progressive output (NTSC only), the speed cannot be changed.

7Repeat Play

During playback of the chapter/title you wish to repeat, press the REPEAT button.

Each time the button is pressed, the unit will alternate between chapter repeat, title repeat, and repeat OFF.

Note 1:

The repeat playback function cannot be used on discs displaying the “Operation Inhibited” message.

[Repeat Playback of a Designated Scene]

At the beginning and end points of the scene you wish to repeat, press the RPT A-Bbutton.

Note 2:

Repeat playback cannot span the borders between titles.

Note 3:

The repeat playback function cannot be used on discs displaying the “Operation Inhibited” message.

[To Return to a Specific Scene]

1.At the point you will wish to return to, press the RPT A-Bbutton.

2.Later during playback, when you wish to return to the designated point, press the PLAY button.

CLEAR

To stop repeat playback, press the button.

Note:

The repeat playback function cannot be used on discs displaying the “Operation Inhibited” message.

7To change the image angle

During playback of a DVD-Video disc, press the ANGLE button.

Each time the button is pressed, the image alternates between the available angles. With DVD-Video discs containing multiple recorded angles of view, the angle can be switched as desired during playback.

Such discs are marked by the angle mark () on the jacket.

7To Change the Subtitle Setting During Playback

During playback of a DVD-Video disc, press the

SUBTITLE button.

Each time the button is pressed, the subtitle display setting alternates between those available.

If multiple language subtitles are recorded on the disc, the subtitle can be selected from among those recorded. Some DVD-Video discs also allow subtitle selection from the disc’s onscreen menu. In this case,

display the menu by pressing the button and select the desired subtitle setting directly from the menu. When playing a DVD-Video disc, the subtitle setting selected here is temporary. When playback is stopped, the subtitle setting reverts to the default selected using the SET UP section = [Playback] = [Language] = [Subtitle] command.

7To Change Audio During Playback

During playback of a DVD-Video disc, press the AUDIO button.

Each time the button is pressed, the audio alternates between those available.

If multiple language soundtracks have been recorded on the disc, the language can be selected from among those recorded. Some DVD-Video discs also allow language selection from the disc’s onscreen menu. In this case, display the menu by pressing the

button and select the desired language setting directly from the menu.

When playing a DVD-Video disc, the language setting selected here is temporary. When playback is stopped, the language setting reverts to the default selected using the SET UP section = [Playback] = [Language] = [Audio] command.

7Operations with a Wheel Mouse

When using a mouse with center wheel control, frame advance, pause, fast forward and fast reverse can be performed.

[Press the Wheel]

The unit will enter standby mode. If the unit is already in the standby mode, standby mode will be released.

[Rotate the Wheel Toward You]

When the wheel is rotated forward during standby mode, the playback will be advanced by individual frames. During other playback modes, fast forward will begin. If the wheel is rotated more, the scan speed can be changed. The speed can be increased to 96x normal, after which time it drops to 6x.

[Rotate the Wheel Away from You]

When the wheel is rotated backwards during standby mode, the playback will be reversed by individual frames. During other playback modes, fast reverse will begin. If the wheel is rotated more, the scan speed can be changed. The speed can be increased to 96x normal, after which time it drops to 6x.

Note:

Depending on the disc used, the actual scan speed may be different from the displayed speed. The speed may be slower particularly when using angle playback.

PRV-LX1 En