2Press the remote control unit’s SETUP button
|
| STOP |
| PLAY |
| REPEAT | DISPLAY | PAUSE |
|
| RPT |
| STEP | |
| AUDIO |
| SCAN | |
| ANGLE SUBTITLE | PREV | NEXT | |
SETUP | MENU |
|
|
|
TOP |
| ENTER |
| |
| MENU |
|
| |
| SETUP |
|
|
|
| 1 | 2 | 3 | RETURN |
| 4 | 5 | 6 | TITLE/CHP |
| FRM/TIME | |||
| 7 | 8 | 9 | FRM/TIME |
| 0 | >10 | CLEAR | SEARCH |
DXX2527
3Using the mouse to display and access the playback control bar.
Press both right and left mouse buttons simultaneously.
\ | Control bar is displayed. |
|
Control bar
Press the FUNCTION button
Move the mouse cursor over the FUNCTION button and click the mouse’s left button.
Basic Operations
4Access from the Keyboard by Assigning a Function key.
|
| Function Menu | |
Use main unit setting to assign | |||
appears when F1 | |||
FUNCTION button to F1 key. | key is pressed. | ||
7To Exit the Function Menu
Use either of the following methods:
1Press the Exit button found on any of the sub-
menus (move mouse cursor over the Exit button and press the left mouse button).
2Press the main unit’s front panel FUNCTION
button.
3Press the remote control unit’s SETUP button.
4 Click the right button on the mouse (Note 6).
5 If the Function Menu has been assigned to a function key on the keyboard, press that key.
Note 6:
Use of the mouse’s right button to exit the Function Menu is supported only during display of the top menu.
7Control Bar
The control bar is displayed by pressing the mouse’s right and left buttons simultaneously. When the control bar is displayed, pressing the mouse’s right and left buttons once again will cause the control bar to be hidden. When the mouse cursor is moved over the control bar, the cursor pointer arrow 
changes to a hand 
. When the hand 
is displayed, it can be used to perform the same operations available with the remote control unit; move the hand over the desired item and select by clicking the left mouse button.
The position of the control bar can be changed by placing the mouse cursor on the left edge and dragging. (Note 7)
Note 7:
The movable range of the control bar is limited to that area not overlapping the OSD display. Also, the new location of the control bar is preserved until the Function Menu is displayed.
21