Names of Parts

 

 

 

 

 

 

No.

Name

Function

10

STOP button (7)

Functions to stop recording or playback. Until all internal operations are

 

 

completed, the indicator flashes (white), and when fully completed, the

 

 

unit returns to the idling condition and the indicator lights (white). Also,

 

 

during idle condition, pressing the STOP button while holding down the

 

 

CURSOR (bottom pointing arrow) button turns progressive encoding ON/

 

 

OFF. (*2)

 

 

To switch the selected TV system format (NTSC/PAL), hold the CURSOR

 

 

(upward pointing arrow) button depressed and press the STOP button.

11

PLAY button (3)

When this button is pressed, playback begins from selected source (DVD

 

 

drive or HDD), and the indicator lights (white). When HDD is designated

 

 

as the recording destination and time shift playback has been set, this

 

 

button responds even during recording, and initiates playback from the

 

 

recording start.

 

 

 

12

PAUSE button (8)

When pressed, recording or playback is temporarily interrupted and the

 

 

indicator lights (white). During recording, allows automatic setting of

 

 

chapters. To resume recording from the recording pause mode, press the

 

 

REC button.

13

REC button ()

When pressed, recording begins to the selected recording destination

 

 

(drive or project), and the indicator lights (white).

14

MOUSE/KEYBOARD connectors

Allows connection of a USB mouse, USB keyboard and USB HDD to the unit. (*3)

15

STEP FWD button (E)

During normal playback, press for frame advance. Hold depressed for

 

 

slow motion playback; during slow mode, press again to increase

 

 

playback speed. (*5)

 

 

 

16

STEP REV button (e)

During normal playback, press for frame playback in reverse direction.

 

 

Hold depressed for slow motion playback; during slow mode, press to

 

 

decrease playback speed. (*5)

17

SCAN/SKIP FWD button (¡/¢)

During playback, press to move to next title or chapter. Hold depressed to

 

 

initiate scan mode.

18

SCAN/SKIP REV button (1/4)

During playback, press to move to previous title or chapter. Hold

 

 

depressed to initiate scan mode.

19

ENTER button

Press to select function menu items and commands, and to input DVD

 

 

menu items and commands (during DVD playback).

 

 

During recording, press to insert chapter marks at optional locations.

 

 

 

20

CURSOR buttons (5, 3, ∞, 2)

Use when selecting function menu items, and for DVD menu control

 

 

(during DVD playback).

21

Filter cover (2)

These are ventilation ports provided to prevent excessive heating of

 

 

internal parts. During installation and operation, do not allow these ports

 

 

to become blocked, since malfunctions may result.

 

 

* Air filters are installed inside these filter covers, and must be removed

 

 

and replaced at regular intervals. Continuing to use the unit with clogged

 

 

filters may result in malfunction. Consult the appended instruction sheet

 

 

“Air Filter Replacement Instructions and Precautions”.

 

 

 

22

FUNCTION button (*4)

Press to enable and disable the monitor’s on-screen function menu

 

 

display (default setting: DISABLED). When disabled, the unit returns to

 

 

idling condition.

23

DISPLAY button

Press to turn on-screen display (OSD) ON/OFF (default setting: OFF). This

 

 

button does not operate when on-screen function display is set to

 

 

DISABLED.

24

Remote control sensor (Î)

Receives signals from the remote control unit. Do not allow this part to be

 

 

blocked by other objects.

25

VOLUME knob

Use to adjust output level to the headphones jack.

26

PHONES jack

Use to connect headphones.

 

 

 

*2 Progressive is supported only during NTSC output.

•Connect to progressive-scan TV monitor. Non-progressive monitors will not produce correct playback.

•When progressive is set to ON, no video is output to any output connectors except the component output.

*3 Functionality of connected devices is not guaranteed. If USB mouse and keyboard operation is unstable, try disconnecting

and reconnecting the USB connector. If a USB hard disk drive is not recognized, or if operation is unstable, change to a hub supporting USB 2.0. If operation continues to be erratic, inquire your Pioneer dealer or one of the service centers listed at the end of this manual.

*4 This operates the same as the remote control unit’s SETUP button. The FUNCTION button operates only in the idling condition.

*5 When performing reverse slow-motion playback with progressive output (NTSC only), the speed cannot be changed.

15

PRV-LX1 En