USRobotics 9003 manual Troubleshooting Checklist, Status LEDs

If your ISP gave you software to install, install the software now. Be sure to read and follow the installation instructions.

3.You can test your connection by registering your router at: www.usr.com/productreg

Troubleshooting

Troubleshooting Checklist

To help diagnose the problem, use the checklist below.

✔Confirm that you have secured the power adapter to the router and to an active wall outlet. The “PWR” LED should illuminate.

✔Confirm that you have secured the telephone cable to the telephone wall jack and to the router. The “ADSL” LED should illuminate.

✔Confirm that you have secured the Ethernet cable to the “ENET1” and/ or “ENET2” port on the router and to the computer’s network interface card. The “ENET1” or “ENET2” LED, or both, should illuminate.

✔If you’re using the USB cable: Confirm that you’ve secured the USB cable to the “USB” port on the router and computer. The “USB” LED should illuminate.

Status LEDs

The front of the U.S. Robotics SureConnect ADSL Ethernet/USB Router has five LEDs. The first from the left is the “PWR” LED. The second and third are the data transfer “ENET1” and “ENET2” LEDs. The fourth is the “USB” LED. The fifth is the “ADSL” LED. LED conditions below indicate the router’s operational status.

12