USRobotics 9003 manual Installation Overview & System Requirements, What You Need Before You Begin

For current product support and contact information, go to this Web site: http://www.usr.com/broadbandsupport

Thank you for purchasing the U.S. Robotics SureConnect ADSL Ethernet/USB Router, Model 9003. The following instructions walk you through installation of the U.S. Robotics SureConnect ADSL Ethernet/USB Router.

Please write down your serial number for future reference. If you need to call our Technical Support department, you must have this number to receive assistance. You’ll find your serial number on a bar code sticker on the bottom of the router and also on the box. This number has 12 characters. You will also need your model number. It appears below.

Write your serial number in the space provided below.

9003

Model Number Serial Number

Installation Overview & System Requirements

What You Need Before You Begin

•Active ADSL and Internet service from your local telephone company or Internet Service Provider (ISP).

•A microfilter may be required for each telephone device (telephones, answering machines, and fax machines) that shares the same phone line as the ADSL signal. Make sure that no filter connects between the ADSL router and telephone wall jack. (Some installations require a special type splitter between the router and wall jack. In these instal- lations, the splitter must include both telephone and router jacks. If the splitter doesn’t, don’t install it between the phone jack and router.)

Your ISP should be able to provide the following:

•Your user name and password, if they were assigned

•ADSL Standard (Modulation)

-	G.dmt	-	Multi-Mode
-	G.lite	-	T1.413, Issue 2

•VPI/VCI Settings