USRobotics 9003 manual Connect the Cables, Description

•A qualification test will run to verify that your system meets the minimum instal- lation require- ments. The Results screen will display those items in your configuration that passed with a green flag and the ones that failed with a red flag. If your system passed the qualifi- cation, click Next.

If the software notifies you that your system failed the test, click the View Report button. The report identifies which component failed.

Step 3. Connect the Cables

The table below summarizes data for connections and ports on the back of the router.

Item	Description
O / I	Pushbutton switch that turns the U.S. Robotics SureConnect ADSL USB/
	Ethernet Router on and off.
Power	Input jack that accepts cable from wall power supply.
	Connects an RS-232 cable (not included) to the router. You can use the
Console	cable to communicate to the router through the Terminal User Interface.
	The Terminal User Interface (TUI) is another way to configure the router
	or get diagnostic info. The TUI substitutes for the Web User Interface.
USB	Universal serial bus port on the back of the router.
ENET1	Ethernet Port 1 on the back of the router.
ENET2	Ethernet Port 2 on the back of the router.
ADSL	Digital subscriber line RJ-11 service jack on the back of the router.

6