USRobotics 9003 manual Regulatory Information

Regulatory Information

Manufacturer’s Declarations of Conformity

FCC Declaration of Conformity

We declare under our sole responsibility that the U.S. Robotics SureConnect ADSL Ethernet/USB Router to which this declaration relates, is in conformity with the following standards or other normative documents:

ANSI C63.4-1992 Methods of measurement

Federal Communications Commission 47 CFR Part 15, subpart B

1)15.107 (e) Class B Conducted Limits

2)15.109 (g) Class B Radiated Emissions Limits

FCC Class B Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1)this device may not cause harmful electromagnetic interference, and

2)this device must accept any interference received including interference that may cause undesired operations.

Radio and Television Interference

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates and uses radio frequency energy and, if not installed and used in accordance with the instructions, may cause interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna or cable input device.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

The user may find the following information prepared by the Federal Communications Commission helpful:

Consult the dealer or an experienced radio/TV technician for help.

Telephone Interference Bulletin

This document is available on the Internet through the FCC Consumer Information Bureau Home Page at http://www.fcc.gov/cib. Under Consumer Information Directory>Telephone>Miscellaneous Telephone Information, select Interference to Telephones.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

In order to maintain compliance with the limits of a Class B digital device, U.S. Robotics requires that you use a quality interface cable when connecting to this device. Suggested cable type is 90-ohm USB cable for the USB port, and standard telephone cable for the RJ-11 port. The telco cable needs to be connected with a minimum 26AWG telephone cable.

UL Listing/C-UL Listing

This information technology equipment is UL Listed and C-UL Listed for both the US and Canadian markets respectively, for uses described in the User Guide.

FCC Part 68 Registration

Customer Information

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone company. This equipment uses the following Universal Service Order Code (USOC) jacks: RJ-11.

19