UTStarcom manual Starting Up, Turn Your PPC-6700 On and Off, Calibrate the Device, Buttons Lock

1.4 Starting Up

Turn Your PPC-6700 On and Off

To turn on your PPC-6700, press the POWER button on the top of the device. When you turn on the device for the first time, you are asked to complete a calibration process. For more information, see “Calibrate the Device” in this section.

To turn off the device, press POWER again.

Calibrate the Device

Calibrating the device screen involves tapping the center of a cross with the stylus as it moves around the screen. This process ensures that when you tap the screen with your stylus, the tapped item is activated.

If your device does not accurately respond to screen taps, please follow these steps to re-calibrate it:

1.Tap Start > Settings > System tab > Screen.

2.On the General tab, tap Align Screen, and follow the instructions on the screen.

Buttons Lock

It is possible to lock the buttons on the device, so that the applications may not be accidentally launched. Once you enable this feature, only the Power button can turn on your PPC-6700.

To configure the Buttons Lock settings:

1.Tap Start > Settings > Personal tab > Buttons.

2.On the Lock tab, select the Lock all buttons except Power button check box.

3.Tap OK.

Section 1: Getting Started 13