UTStarcom PPC-6700 manual To connect to a private network, To start browsing the Internet

To connect to a private network:

1.Obtain the following information from your network administrator:

Server phone number.

User name.

Password.

Domain (provided by the network administrator).

2.Tap Start > Settings > Connections tab > Connections.

3.In My Work Network, follow the instructions for each type of connection.

4.Complete the connection wizard, and then tap Finish.

To start browsing the Internet:

When the connection settings are completed, tap Start > Programs > Internet Explorer.

To reset or modify the network card settings:

1.Tap Start > Settings > Connections tab > Network Cards.

2.In the My network card connects to list, select the appropriate item:

If you want to connect to the Internet using your ISP, select The Internet.

If you want to connect to a private network, select Work.

3.In Tap an adapter to modify settings, tap the appropriate adapter. The fields on the IP Address tab are populated automatically.

4.Configure the TCP/IP settings (if required). If your ISP or private network does not use dynamically-assigned IP addresses, tap Use specific IP address and enter the requested information. Contact your ISP or network administrator to obtain the IP address, subnet mask, and/or default gateway.

Section 6: Getting Connected 77