UTStarcom PPC-6700 manual Using Wireless Modem, Set Up Your PC, To configure a modem on your PC

Models: PPC-6700

1 176
Download 176 pages 22.71 Kb
Page 92
Image 92

6.4 Using Wireless Modem

Wireless Modem activates your PPC-6700 as a wireless modem and lets you connect your PC to a wireless network. Before you create and configure a new modem using a connection, you must install the drivers on your PC.

To establish a connection using Wireless Modem:

1.On your PPC-6700, tap Start > Programs > Wireless Modem.

2.In the Connection Type list, select IrDA. This allows you to connect your PPC-6700 via infrared to a PC.

3.Tap Start.

Set Up Your PC

Before you start using Wireless Modem with an IrDA connection, you must configure a new modem on your PC and obtain the Username and Password from your Internet service provider (ISP).

To configure a modem on your PC:

1.On your PC, select Start > Settings > Control Panel.

2.Double-clickPhone and Modem Options.

3.On the Modems tab, click Add.

4.Select the Don’t detect my modem; I will select it from a list check box.

5.In the Manufacturers list, select Standard Modem Types.

6.Select Standard 33600 bps Modem, and then click Next.

7.Select the modem port on which you want to install the drivers.

8.Click Next.

9.Click Finish. Now, when you check the Modems tab in the Phone and Modem Options dialog box, a Standard 33600 bps Modem appears in the modem list.

10.Select Standard 33600 bps Modem.

86 Section 6: Getting Connected

Page 92
Image 92
UTStarcom PPC-6700 manual Using Wireless Modem, Set Up Your PC, To establish a connection using Wireless Modem