UTStarcom PPC-6700 manual Connect to a Wi-Fi network

6.Tap to disconnect active data services (such as using the 1XRTT or EVDO dialup connection). You cannot reconnect data services in Comm Manager.

7.Tap to synchronize the device and computer via ActiveSync. For more information about the configuration settings for ActiveSync, see Section 4.

Connect to a Wi-Fi network

1.On the Comm Manager screen, tap the Wi-Fi button to turn on/off the wireless function.

2.Tap Settings > Wi-Fi Settings to configure the required settings. When the configuration is completed, you can connect to a Wi-Fi network using your device.

Note:

Tap the Network Cards icon ( ) on the Wi-Fi Settings screen to configure wireless networks and network adapters.

To save battery power while connected to a Wi-Fi network:

1.On the Settings tab of the Wi-Fi Settings screen, move the Power Save Mode slider to a position that optimizes performance with the least

power consumption.

2.Select the Auto turn off WLAN if not connected check box to allow your PPC-6700 to turn off the WLAN function automatically when no signal is detected.

Section 6: Getting Connected 91