UTStarcom PPC-6700 manual Beam Information Using Bluetooth, To rename a Bluetooth partnership

3.Enter a passkey (the same passkey that is entered on the device requesting the partnership) to establish a secure connection. The passkey must be between 1 and

16 characters.

4.Tap Next, and then Finish. You can now exchange information with the other device.

To rename a Bluetooth partnership:

1.Tap Start > Settings > Connections tab > Bluetooth.

2.Tap and hold the partnership on the Devices tab.

3.On the shortcut menu, tap Edit.

4.Enter a new name for the partnership.

5.Tap Finish.

To delete a Bluetooth partnership:

1.Tap Start > Settings > Connections tab > Bluetooth.

2.Tap and hold the partnership on the Devices tab.

3.On the shortcut menu, tap Delete.

Beam Information Using Bluetooth

1.On the device, tap and hold an item to beam. The item can be an appointment in your calendar, a task, a contact card, or a file.

2.Tap Beam [type of item].

3.Tap the device name to which you want to send the item.

Note:

If the device you want to beam to does not appear in the box, make sure that it is turned on, discoverable, and within close range (10 meters) of your device.

84 Section 6: Getting Connected