![](/images/new-backgrounds/1188345/18834571x1.webp)
32
Chapter 2: Microscan
Microscan
Operating the Microscan MS-3 Laser with diagnostics
About this topic This topic describes how to:
❑Initialize the Microscan
❑Scan a barcode
Read this topic if you are an operator who wants to troubleshoot or operate the Microscan
Before you start Before you can send commands to the Microscan
To initialize the Microscan MS-3 Laser:
1.Open Microscan Bar Code Reader Diagnostics.
2.Click the Profiles tab.
3.Select a profile from the Profile name list.
4.Click Initialize this profile.
Scanning a barcode To scan a barcode:
1.Open Microscan Bar Code Reader Diagnostics. Click the Controls tab.
2. Place the labware on the device that has the Microscan