Advanced Function Area
Advanced function area: only available for administrator. It has contained three
categories.
Setting | System Configuration |
Trigger | Send out current message or setup activities |
Capture | Capture current screen and save to HDD or other media |
Setting menu consists of the Basic menu and the Application menu. The Basic menu is used for basic settings of the
Basic Setting
For the setting, you will see there are divided into two categories – Basic Setting and Application.
Basic SettingSymbol | Item | Action |
|
|
|
| System | Define Frame Rate, Turn on/off “Remote camera control”, and |
|
| view system log file. |
|
|
|
| Camera | Adjust camera parameters and set camera tour |
|
|
|
| Network | Configure Network setting such as DHCP On/Off, DDNS and |
|
| PPPoE |
|
|
|
| User | Setup user name, password and login privilege |
|
|
|
| IP Filter | Setup legal IP address of user login (This function should be |
|
| used with function “User” respectively) |
|
|
|
| Event | Define the event from Motion detection and sensors for |
|
| security purpose |
|
|
|
System: Define Frame Rate and Turn on/off “Remote camera control”
20/80